1. Defrag Disk to Speed Up Access to Data
One of the factors that slow the performance of the computer is
disk fragmentation. When files are fragmented, the computer must
search the hard disk when the file is opened to piece it back
together. To speed up the response time, you should monthly run
Disk Defragmenter, a Windows utility that defrags and
consolidates fragmented files for quicker computer response.
* Follow Start > All Programs > Accessories > System Tools >
Disk Defragmenter
* Click the drives you want to defrag and click Analyze
* Click Defragment
2. Detect and Repair Disk Errors
Over time, your hard disk develops bad sectors. Bad sectors slow
down hard disk performance and sometimes make data writing
difficult or even impossible. To detect and repair disk errors,
Windows has a built-in tool called the Error Checking utility.
It’ll search the hard disk for bad sectors and system errors and
repair them for faster performance.
* Follow Start > My Computer
* In My Computer right-click the hard disk you want to scan and
click Properties
* Click the Tools tab
* Click Check Now
* Select the Scan for and attempt recovery of bad sectors check
box
* Click Start
3. Disable Indexing Services
Indexing Services is a little application that uses a lot of
CPU. By indexing and updating lists of all the files on the
computer, it helps you to do a search for something faster as it
scans the index list. But if you know where your files are, you
can disable this system service. It won’t do any harm to you
machine, whether you search often or not very often.
* Go to Start
* Click Settings
* Click Control Panel
* Double-click Add/Remove Programs
* Click the Add/Remove Window Components
* Uncheck the Indexing services
* Click Next
4. Optimize Display Settings
Windows XP is a looker. But it costs you system resources that
are used to display all the visual items and effects. Windows
looks fine if you disable most of the settings and leave the
following:
* Show shadows under menus
* Show shadows under mouse pointer
* Show translucent selection rectangle
* Use drop shadows for icons labels on the desktop
* Use visual styles on windows and buttons
5. Speedup Folder Browsing
You may have noticed that every time you open My Computer to
browse folders that there is a little delay. This is because
Windows XP automatically searches for network files and printers
every time you open Windows Explorer. To fix this and to increase
browsing speed, you can disable the “Automatically search for
network folders and printers” option.
6. Disable Performance Counters
Windows XP has a performance monitor utility which monitors
several areas of your PC’s performance. These utilities take up
system resources so disabling is a good idea.
* Download and install the Extensible Performance Counter List (http://www.microsoft.com/windows2000/techinfo/reskit/tools/existing/exctrlst-o.asp)
* Then select each counter in turn in the ‘Extensible
performance counters’ window and clear the ‘performance counters
enabled’ checkbox at the bottom button below
7. Optimize Your Pagefile
You can optimize your pagefile. Setting a fixed size to your
pagefile saves the operating system from the need to resize the
pagefile.
* Right click on My Computer and select Properties
* Select the Advanced tab
* Under Performance choose the Settings button
* Select the Advanced tab again and under Virtual Memory select
Change
* Highlight the drive containing your page file and make the
initial Size of the file the same as the Maximum Size of the
file.
Windows XP sizes the page file to about 1.5X the amount of
actual physical memory by default. While this is good for
systems with smaller amounts of memory (under 512MB) it is
unlikely that a typical XP desktop system will ever need 1.5 X
512MB or more of virtual memory. If you have less than 512MB of
memory, leave the page file at its default size. If you have
512MB or more, change the ratio to 1:1 page file size to
physical memory size.
8. Remove Fonts for Speed
Fonts, especially TrueType fonts, use quite a bit of system
resources. For optimal performance, trim your fonts down to just
those that you need to use on a daily basis and fonts that
applications may require.
* Open Control Panel
* Open Fonts folder
* Move fonts you don’t need to a temporary directory (e.g. C:\FONTBKUP?)
just in case you need or want to bring a few of them back. The
more fonts you uninstall, the more system resources you will
gain.
9. Use a Flash Memory to Boost Performance
To improve performance, you need to install additional RAM
memory. It’ll let you boot your OS much quicker and run many
applications and access data quicker. There is no easiest and
more technically elegant way to do it than use eBoostr (http://www.eboostr.com).
eBoostr is a little program that lets you improve a performance
of any computer, powered by Windows XP in much the same way as
Vista’s ReadyBoost. With eBoostr, if you have a flash drive,
such as a USB flash thumb drive or an SD card, you can use it to
make your computer run better. Simply plug in a flash drive
through a USB socket and Windows XP will use eBoostr to utilize
the flash memory to improve performance.
The product shows the best results for frequently used
applications and data, which becomes a great feature for people
who are using office programs, graphics applications or
developer tools. It’ll surely attract a special attention of
laptop owners as laptop upgrade is usually more complicated and
laptop hard drives are by definition slower than those of
desktops.
10. Perform a Boot Defragment
There's a simple way to speed up XP startup: make your system do
a boot defragment, which will put all the boot files next to one
another on your hard disk. When boot files are in close
proximity to one another, your system will start faster.
On most systems, boot defragment should be enabled by default,
but it might not be on yours, or it might have been changed
inadvertently. To make sure that boot defragment is enabled:
* Run the Registry Editor
* Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Dfrg\BootOptimizeFunction
* Set the Enable string value to Y if it is not already set to
Y.
* Exit the Registry
* Reboot
Hope you find these 10 tips useful. Have a nice day!
About The Author